Solar power is a kind of renewable resource that is very good for the environment. This energy does not create gases that warm the planet, and it also keeps water and air clean. It can sustain itself and is a fine method to supply power for houses or companies. When you use a normal utility company, the prices often keep increasing. However, if you join the grid with a renewable energy provider, your rates are more stable. They utilize energy from renewable sources, for instance, solar power, which aids in making the prices more consistent. Additionally, they typically bill you solely for the amount of electricity consumed, rather than the fluctuating rates common among different electric service companies. So installing a solar energy system might be more beneficial than you think. Below, we will discuss the working of solar energy systems the important steps of solar installation, and how you can get them done in the most efficient way possible.

How Does Solar Energy System Work

In a system for solar energy, there are panels that gather solar power. There is also a frame to keep the panels in place and devices like an inverter and computer controller turn sunlight into electrical power which is direct current. The inverter then changes this electricity so it becomes alternating current, which is what houses use for machines and appliances. A digital device watches over the solar power setup to make sure it works best all the time. If your system always runs without any electricity or is entirely separate from the main electricity network, then getting a solar battery is very important.

Solar Installation Process

There are a few things to consider before you start the process.

Installation Location

First, think about where to put your solar panels carefully. Many times, people choose to place them on the roof; this makes sense as roofs are often a good fit and get a lot of sun. But if there is a situation where someone cannot or does not want to put these panels on the roof, putting them on the ground is another good choice. Nothing must block sunlight from reaching them. Follow the below steps next for appropriate solar installation.

Things to Consider while Installing Panels on Roof

  • First, we need to construct a framework for safety while arranging things on the roof.
  • Next, we need to set up the structure that will support the solar panels; this is what they will rest on. The whole framework for support needs to be tilted at an angle that is between 18 and 36 degrees; this way, it gets the most sunlight.
  • Once the mounts are prepared, you need to attach the solar panel to them. Make sure to tighten all bolts and nuts well for stability.
  • Then, for installation, we connect the electrical cables. Often, individuals select MC4 connectors since they are compatible with various solar panel types. Make sure to shut off the electricity of the house supply during the wiring installation.

Solar Inverter Installation

Next, the solar inverter should be linked to the system. Usually, it is placed close to the main panel and can be inside or outside. Inverters work better when they are in a cool area. It is good to place the inverter where it does not get the sun in the afternoon if it is outside. When set up inside, the garage or service room often works well as locations because they remain cool throughout much of the year and are equipped with airflow systems.

Connect Solar Inverter and Solar Battery

Next, you must link the solar inverter with the solar battery. Storing power in a solar battery helps prevent concerns about not having enough energy when it is cloudy and can reduce expenses for the solar panel battery at set-up time. This makes your investment worth it.

Connect the Inverter to the Consumer Unit

The inverter must be linked to the consumer unit for it to create electricity. There should be a generation meter installed so we can track how much power is coming from the solar panels. You can monitor how well your solar system works using a computer or another gadget. This way, you can see when you produce more electricity and choose the best times for operating appliances like your washing machine. 

Solar panel maintenance

Solar panels do not have parts that move, so they need only a small amount of upkeep. After paying for the initial setup cost of these solar panels, there is little to spend on their maintenance.


Maintaining cleanliness is the key aspect of upkeep; it needs multiple checks from reliable solar installation services a year for any gathered dirt or items. For effective sunlight absorption, the panels should be free of dirt and have nothing blocking them. Before starting to clean the panels on your own, it is advisable to consult with the installer regarding what is stated in the warranty. Certain solar panel manufacturers could void your warranty if you undertake cleaning by yourself. For cleaning the panels, simply use a regular garden hose to wash their tops. It is good to do this work early in the morning or in the late part of the afternoon. Also, if the panels need more cleaning than what you can do with a hose, maybe you can use a sponge and soapy water to scrub them. Think about getting a cleaning service if the panels are very high or need thorough cleaning. It is recommended to have the installer inspect your system every four to six years. It is also smart to ask the installer about specific maintenance requirements for your solar installation.

Myrtle Beach Solar

It is essential to employ the help of skilled solar installation services. They ensure good outcomes and assist in safeguarding your investment with their specialized skills. And if you are looking for the top results in North Carolina, consider the services of Myrtle Beach Solar experts. They possess all the skills and history needed to deliver excellent outcomes. Our services for installing solar panels are made to turn your house into an eco-friendly haven at very good prices. Contact us today to receive the top services and guarantee your satisfaction.